Noisecom offers various noise generators for a wide range of applications.
|UFX7000A AWGN Noise Generator
|The UFX7000A Series instruments provide Broadband Gaussian noise (AWGN) with superior flatness. The output power can be attenuated up to 127 dB in 1 dB steps, and several connector types are available.
|PNG7000 Analog AWGN Noise Generator
|The PNG7000A Series instruments generate white Gaussian noise (AWGN) and provide a summing input to control signal-to-noise (SNR) or carrier-to-noise (CNR) for bit-error-ratio (BER) testing. The output can also be used as a source for Jitter applications.
|J7000 Jitter Noise Generator
|The J7000A Series instruments high crest factor output is used as a random jitter source for serial data bus applications, including PCI Express Gen I & II, Serial ATA, and Fiber Channel. The noise source is designed for the PCI-SIG total jitter (Tj) model serial data application, but can be used for any random jitter noise application.
|JV9000 Series: Adjustable Vcc Noise Generator for PSRR Analysis
|Noise on Ground and Vcc traces is becoming an increasing concern of component designers, manufacturers and system users. Whether developing or operating highly accurate PLL or clock circuits, A/D D/A converters and other linear analog circuits for precision operations or such that are reliant on precise threshold functions, Ground and VCC noise can significantly influence overall system functionality. Even high-speed digital circuits are not immune against this kind of noise and should be tested for Ground and VCC noise related effects on data jitter and data integrity.
|CNG-EbNo SNR Noise Generator
|The UFX-EbNo is a fully automated precision signal to noise generator that sets, and maintains a highly accurate ratio between a user supplied carrier and internally generated noise, over a wide range of signal power levels and frequencies. The internal power meter provides repeatable SNR waveforms for accurate signal generation.
|DNG7500 Digital Noise Generator
|The programmable DNG7500, generates pseudo-random noise and CW signals for RF, Microwave, and digital applications. It can provide up to a 70 MHz wide RF output to emulate real-world noise and interference conditions. The user can create many complex waveforms, including digital notches, and burst pattern waveforms.
|GPS7500 Noise and Interference Generator
|The programmable GPS7500 Noise & Interference Generator is capable of generating up to a 40 MHz wide noise or interference band for GPS receiver susceptibility testing.
|NC6000A/8000A Series AWGN Noise Generator
|The NC6000A and NC8000A Series instruments are designed for general-purpose noise applications on the bench, or in a rack test station. The manual controls make it simple to operate and reduce test set up time. Standard units can be modified for specific customer requirements.